The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the deluxe package (excluding the PF 80) along with a stereo bar and proof of performance charts in an attractive carrying case (large Soundtool case).

 

Polar pattern; Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Sensitivity; 23 mV/Pa (-33 dBV) ± 0.5 dB
Max. SPL; 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
Equivalent noise level; 6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio; 88 dB
Preattenuation pad; -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope; 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance; <=200 ohms
Recommended load impedance; >= 2,200 ohms
Supply voltage; 48 V phantom power to DIN/IEC
Current consumption approximately; 4.5 mA
Dynamic range; 134 dB minimum
Connector; 3-pin XLR to IEC
Dimensions; 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
Net weight; 300 g (10.6 oz.)
Patent(s); Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)