|
Engineering information: |
|
Components: |
|
LMF: 2×8＂ Impedance: 8Ω Voice-coil: 2＂ |
|
HMF: 2×8＂ Impedance: 8Ω Voice-coil: 2＂ |
|
HF: 1×1.4＂ Impedance: 8Ω Voice-coil: 3＂ |
|
Dimensions(H×W×D): (249,217)mm×748mm×538mm |
|
Net Weight: 54 Kg |
|
Connectors: 2×parallel EP6 sockets |
|
Active crossover:pin 1: LMF negative, pin 2: LMF positive |
|
pin 3: HMF negative, pin 4: HMF positive |
|
pin 5: HF negative, pin 6: HF positive |
|
Construction: |
|
15mm birch plywood trapezoidal cabinet finished in black wearable paint |
|
Accessories: |
|
Handles: 4 in each side, 2 in top and 2 in bottom |
|
Flying and Linfting: special rigging system, heavy-duty 4-castor sliding board optional |
|
Grille:water and fire resistant plastic-veil steel grille (80% transparent) |
|
Specifications: |
|
Frequency Response: 85Hz--20KHz ±3dB |
|
Sensitivity: LMF: 95 dB/1W.1M HMF: 95 dB/1W.1M HF:109.5 dB/1W.1M |
|
Max SPL: 134dB (continuous); 140dB (peak) |
|
Dispersion (H×V): 5o×90o |
|
Impedance: LMF: 16Ω HMF: 16Ω HF: 8Ω |
|
Power Handling: LMF: 150W (r.m.s) 300W (program) 600W (peak) |
|
HMF: 150W (r.m.s) 300W (program) 600W (peak) |
|
HF: 80W (r.m.s) 160W (program) 320W (peak) |
|
Recommended AMP: Active crossover: LMF: 600W into 8Ω HMF: 600W into 8Ω HF: 160W into 8Ω |
|
Recommended Crossover points: Active crossover at 250Hz/1.63KHz, 24dB/octave slope |
|
System Requirements: |
|
Electronic LMS: dbx 260Drive Reak digital loudspeaker management system
(active crossover mode or partnered by subwoofers) |
|
LF partners: TA-218 subwoofers |
